设为首页   |   加入收藏  |   返回首页
 
发黑、热处理、不锈钢发黑
QPQ、氮化、液体氮化
电缆输送机
电缆牵引机
电缆放线架
电缆放线盘
紧线器
卡线器
连接器
网套
牵引绳和盘架
牵引机张力机
抱杆
剥皮弯管弯曲
剪刀切破
冲孔开孔
母线加工
电缆滑轮系列
压接钳
液压泵
安全防护
MC工程尼龙轮
其他配套件
无锡志丰工程机械设备厂

地址:无锡市惠山区石塘湾工业园
联系人:孙经理 

手机:18961739777

           13616173808
电话:0510-83502027
传真:0510-83507027
邮箱:web@wxzfgc.com
网址:www.wxzfgc.com

 

新闻中心 / NEWS

  
多台电缆输送机串联使用
发布者:admin  发布时间:2016/12/25 10:49:54  点击:2455

本文由无锡志丰工程机械设备厂提供,更多电缆输送机发黑处理 资讯请访问:www.wxzfgc.com

   因大截面电缆重量重,单机使用很难满足施工要求,这时需在牵引机配合下,进行多台电缆输送机串联使用。 
(1) 电缆在牵引机牵引下进入第一台电缆输送机时停止牵引,将电缆夹紧在橡胶履带之间,然后同时开动牵引机和电缆输送机。 
(2) 电缆进入第二台电缆输送机时停止牵引,将电缆夹紧在橡胶履带之间,然后开动牵引机和两台电缆输送机。
(3) 电缆进入第三台输送机时停止牵引,将电缆夹紧在橡胶履带之间,然后开动牵引机和三台电缆输送机。 (4) 重复上述动作,直至电缆进入最后一台电缆输送机,此时便可以进行整条线路电缆的拖放施工作业。为保证各机同步运转,用户需根据具体施工方案配置相应的同步电源控制柜,同步电源控制柜分为总控箱和分控箱,一个总控箱可控制十台分控箱,一个分控箱控制一台电缆输送机,为方便用户使用,每个控制箱均有足够的电源插座,以便总控箱和分控箱和电缆输送机之间的连接,该控制系统为保证安全使用,每个分控箱和总控箱上设置的停止开关均可以让整条线路拖放停止作业,做到分控总停的安全原则。

 

Because of the large cross-section cable weight is heavy, use single is difficult to meet the construction requirements, to be in conjunction with the tractor at this moment, for more than one cable conveyor used in series.(1) the cable under the tractor traction enters the first cable conveyor stop pulling, to clamp the cable between the rubber tracks, and then start the tractor at the same time and cable conveyor.(2) the cable into the second cable conveyor stops traction, to clamp the cable between the rubber tracks, and then start the tractor and two cable conveyor.(3) the cable into the third stage conveyor stops traction, to clamp the cable between the rubber tracks, and then start the tractor and three cable conveyor.(4) repeat the above action, until the last one cable conveyor, cable into the cable can be for the whole line of drag and construction work.To ensure synfuels fiasco synchronous operation, the user must according to the concrete construction plan configuration corresponding synchronous power supply control cabinet, synchronous power control cabinet is divided into general control box and control box, a general control box can control 10 machine control box, a control box and control a cable conveyor, for the convenience of users, each control box all have enough power socket, so that the total control box and control box and the connection between the cable conveyor, the control system to ensure the safe use, each of the points on the control box and total control box set stop switch can stop the whole line drag and drop operation, do share of the total stop security principle.

上一页:如何由低处往高处输送电缆
下一页:电缆输送机使用方法